To Know About Brake Pads

Before 1880, the materials of friction were leathers and woods.

After 1880, the main materials were asbestos, composite resin and other materials. The disadvantage for asbestos was no braking power during raining days and the material was caused occupational injury and environmental pollution by materials. After that, we cared about environmental; there were many countries limited to use materials with asbestos.

After 1990, the main materials were non-asbestos which included iron fibers, ceramic fibers and copper fibers…etc and other composite resin. Japan banned on producing and importing material of brake pads with asbestos from October, 1, 2004. Now, the main materials to manufacture brake pads are semi metallic, organic compounds, ceramic compounds, copper free which are non asbestos. Learn more material information of ADUI brake pads, please browse product specific

On the market, the more popular method is to apply rubberizing coating. However, even if the rubberizing coating is applied evenly or after a long time, the abnormal sound problem will still occur again.

Therefore, our company adopts the most basic method to install the Shim. This way can not only solve the problem, but also eliminate the problem of time and reissue, and provide customers with perfect product quality.

The squeal / noise problem is caused by the frictional vibration between the disc and the disc brake. The reason of the vibration is no more than the gap between the overall brake components.

Therefore, our product design is based on safety priority. The possibility of machine parts impact is reduced to the lowest incidence, and our products can be favorably supported by many partners.

I agree